Linux development

From Navit's Wiki
Revision as of 17:42, 21 March 2016 by KaZeR (talk | contribs) (Updating SVN)
Jump to: navigation, search

Taking care of dependencies

See the Dependencies page for a list of software packages required to build Navit. To build with CMake you will need CMake 2.6 or newer.

Getting Navit from the GIT repository

First, let's make sure we are in our home directory: this is only for the sake of making this tutorial simple to follow. You can save that directory anywhere you want, but you will have to adapt the rest of the instructions of this guide to your particular case.

cd ~ 

Now, let's grab the code from SVN. This assumes that you have subversion installed.

 git clone


There are currently two methods of compiling Navit - using GNU autotools or using CMake. GNU autotools was the old method, but will become deprecated in favour of CMake.


CMake builds Navit in a separate directory of your choice - this means that the directory in which the SVN source was checked out remains untouched. See also CMake.

mkdir navit-build
cd navit-build

Once inside the build directory just call the following commands:

cmake ~/navit

Note: CMake will autodetect your system configuration on the first run, and cache this information. Therefore installing or removing libraries after the first CMake run may confuse it and cause weird compilation errors (though installing new libraries should be ok). If you install or remove libraries/packages and subsequently run into errors, do a clean CMake run:

 rm -r ~/navit-build/*
 cmake ~/navit

Running the compiled binary

The binary is called navit and can be run without arguments:

cd ~/navit-build/navit/

It is advised to just run this binary locally at the moment (i.e. not to install system-wide). Note that for this to work, Navit must be run from the directory where it resides (that is, you must first change your working directory, as described above). If Navit is run from another directory, it will not find its plugins and image files, and will not start.

GNU autotools

WARNING : please use only if you have issues using cmake, as this will soon be deprecated.

Go to the directory where you checked out the svn repository:

cd navit

Start the make dance:

./ && ./configure && make

It is better to use autogen and configure before make, due to the heavy flux of changes in the svn version. Also, putting them all in one command ensures that they go through the next step only if the previous step succeeded. In the end, hopefully, you get a fully compiled navit binary in the navit/ subfolder (so basically, it looks like ~/navit/navit/navit. Yeah.)

Running the compiled binary

Here, I am skipping the usual "make install" because we don't need to install navit systemwide for this example.

To execute navit, you can simply click on the binary file (if you are sure it is compiled properly) and it should launch. If you prefer to launch it from a terminal, you need to go into the directory containing the binary, first, like so:

cd ~/navit/navit/

Updating the GIT code

You don't need to recompile everything to update navit to the latest code; with 'git pull' only the edited files will be downloaded. Just go to the navit directory (e.g. /home/CHANGEME/navit) and run:

git pull

You then only need to run "make" again from your binary folder ( navit-build in the cmake example, or the current folder when using autotools).

Prebuild binairies

Prebuilt binaries exist for many distributions.

Configuring the beast

This is Configuration, young padawan. Good luck :)

You can also check a post describing a Navit configuration on Ubuntu Jaunty.