Car PC touchscreen
If you're planning to use NavIt, then probably you want to take it out with you on the roads. You can put it on your handheld, but you can also put a computer in your car, and drive it using a Touchscreen.
=The VM-84 Touchscreen
This is a really cheap TouchScreen, sold from www.short-circuit.com. You can get it for usually 200$, when a lilliput or equivalent will cost around 300$. And, as a NavIt use, you get 5% discount on the shop!
The only drawback with this touchscreen is its driver. It was a real pain to get it to work the first time. The device is shipped with some drivers, which are nothing but relevant. But now, thanks to this page, it's easy :)
Note : All the credit for this work goes to Martin "cp15" S., who hacked the elographics driver and made it work.
The USB to Uart bridge.
This screen use in fact the cp2101 driver module, for the USB to Uart bridge. So, the first step is to ensure the cp2101 module is loaded. It's shipped with the kernel :
Symbol: USB_SERIAL_CP2101 [=m]
Location: -> Device Drivers -> USB support -> USB Serial Converter support -> USB Serial Converter support (USB_SERIAL [=m])
Once the module is loaded, and the device is plugged, you should get a /dev/ttyUSB0 device. It could be a good time to test it before continuing.
od -h -w10 </dev/ttyUSB0
Touch the screen. You should get datas, something like this :
0000000 55 54 02 ec 0c 90 06 90 00 73 55 54 04 ec 0c 90 0000020 06 90 00 75 55 54 02 60 0b 00 07 00 00 c7 55 54 0000040 04 60 0b 00 07 00 00 c9 55 54 02 54 0a 98 07 98 0000060 00 ea 55 54 04 54 0a 98 07 98 00 ec 55 54 02 c8
Warning : if you have no input on the VGA, or if your input is set to something other than VGA (like RCA1) then the touchscreen functionnality will be disabled by the screen. This mean that it won't send datas to your computer. It took me a while to realize this, and i was thinking that i had a problem with the cp2101 driver.