Navit on Windows Progress on the win32 support will be documented on this page.
- 1 Download the binary distribution package of Navit
- 2 Tips and Tricks
- 3 Compiling / debugging using CodeBlocks & mingw compiler
- 4 Compiling and running using cygwin
- 5 Compiling a native binary using mingw
- 6 Windows Mobile/Windows CE
Tips and Tricks
Compiling, configuring and running Navit on Windows can be a challenge at times. Below are a few hints, in addition to the more detailed instructions following.
- It is best not to use the “win32” GUI (ie <gui type="win32" />) as this is no longer being supported. It is advisable to use the “internal” GUI (<gui type="internal" />) instead.
- It is best not to use the “win32” Graphics Driver (ie <graphics type="win32"/>) as this is no longer being supported. It is advisable to use one of the other Graphics Drivers (eg <graphics type=" gtk_drawing_area"/>) instead.
- Up to and including Navit release 0.0.4 NMEA serial GPS receiver devices (USB/Bluetooth) were supported by the win32 port. Due to code changes Navit releases 0.1.0 and 0.1.1 have yet to re-support this functionality (refer to http://trac.navit-project.org/ticket/332 for an interim patch). You can configure the device by adapting the navit.xml file (specifically, the "source" attribute in the "vehicle" tag). For example, a serial device on Com4 can be configured for navit release 0.0.4 as follows:
- <vehicle name="GPSOnCom4" enabled="yes" active="1" source="file:COM4 baud=115200 parity=N data=8 stop=1" color="#0000ff"/>
Compiling / debugging using CodeBlocks & mingw compiler
Up to and including release 0.0.4 the Win32 builds were supported using the CodeBlocks/mingw development environment, in combination with the glade for win32 GTK devlopment toolkit. The CodeBlocks project files have been added to cvs repository. For release 0.1.0 and later use native mingw (see below) or cygwin (see below).
In order to compile the win32 version of Navit, you need the following software development tools:
- Glade/gtk+ toolkit for win32 from
- ming compiler from Website: mingw
SourceForgeDownload: MinGW (select Automated MinGW installer)
- CodeBlocks IDE from CodeBlocks download page (select recent development snapshot)
Install the packages mentioned above. After everything has been installed you can open the navit.workspace file in CodeBlocks:
- Start the CodeBlocks application
- Open the navit.workspace file (located in projs\CodeBlocks directory)
- Set the GTK_DIR enviroment variable in CodeBlocks (Setting/Environment, and select environments variables)
- the GTK_DIR should point to where you have installed the Glade/Gtk toolkit package (e.g. d:\gtk)
Now you should be able to build/debug the navit project:
ZLIB -lzdll message Settings> Compiler and Debugger..> Global compiler settings In the Linker settings TAB (Add) C:\MinGW\lib\libzdll.a
SAPI You need to download and install the Microsoft Speech SDK 5.1 for this project to build.
Running from debugger
In order to run navit from the CodeBlocks debugger, you have to:
- Copy the navit.xml file from the source directory into the projs\CodeBlocks directory
- Copy the xpm directory from the toplevel directory into the projs\CodeBlocks directory
- Modify the navit.xml to set the map (currently only OSM binary files are supported)
Compiling and running using cygwin
You will probably need the following packages from cygwin :
- gcc (g++ too for sdl)
Prepare the build
Edit configure.in and add the following to CFLAGS at line 10:
It should look like this :
CFLAGS="$CFLAGS -Wall -Wcast-align -Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes -Wpointer-arith -Wreturn-type -D_GNU_SOURCE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include"
autogen.sh && ./configure
If you get :
checking for X... no
try adding the following parameters to ./configure :
Currently, building navit will fail at this point, because we haven't found an implementation of the wordexp function for cygwin.
Here's a message in that thread from an actual competent Cygwin user: http://firstname.lastname@example.org/msg16750.html
The implication of that is a "C library". A "C library" is an "implementation" of reusable code. It consists of a library file that contains the compiled object code and a header file with the matching declarations that goes along with it. The library is implemented as a static archive at build time and simply linked into the app binary. There's nothing to include in that case -- it's already in there.
Make a redistributable package
Please read and understand http://cygwin.com/licensing.html so that you don't infringe Cygwin's intellectual property rights (copyleft) when you distribute the package you've built.
Compiling a native binary using mingw
The main advantage of this method is that it will produce a redistributable binary.
In order to compile the win32 version of Navit, you need the following software development tools
- GTK+ toolkit for win32 from SourceForgeDownload: Glade/GTK+ (select gtk+-win32-devel)
- MinGW from SourceForgeDownload: MinGW (select Automated MinGW installer)
- MSYS from SourceForgeDownload: MSYS Base System
- msysCORE from SourceForgeDownload: MSYS Base System
- diffutils from SourceForgeDownload: MSYS Base System
- autoconf from SourceForgeDownload: MSYS Supplementary Tools
- autogen from SourceForgeDownload: MSYS Supplementary Tools
- automake from SourceForgeDownload: MSYS Supplementary Tools
- gettext from SourceForgeDownload: MSYS Supplementary Tools
- libtool from SourceForgeDownload: MSYS Supplementary Tools
Probably the easiest way to obtain and install all the MSYS packages is to follow the instructions here
Windows Mobile/Windows CE
You can download now cab-data for Windows Mobile and WindowsCE! Highest number is the newest version of NavIt.
Download it and save on your Storage Card. Install it.
Now you have NavIt on your PDA or Mobile Phone.
This is a manual for self compiling (navit.exe)
You need to have a Linux (like Ubuntu). If you didn´t have Linux, start your Linux on Live-CD.
Compiling navit for wince using http://cegcc.sourceforge.net/. Download latest cegcc release and install it.
Source cegcc-arm and mingw
Current installs in /opt/cegcc. Setup a cross-compile environment:
#! /bin/bash export PATH=$PATH:/opt/cegcc/bin/ export CEGCC_PATH=/opt/cegcc export WINCE_PATH=/opt/wince export PATH=$CEGCC_PATH/bin:$PATH export CPPFLAGS="-I$WINCE_PATH/include" export LDFLAGS="-L$WINCE_PATH/lib -L$CEGCC_PATH/lib" export LD_LIBRARY_PATH="$WINCE_PATH/bin" export PKG_CONFIG_PATH="$WINCE_PATH/lib/pkgconfig" export PKG_CONFIG_LIBDIR="$WINCE_PATH/lib/pkgconfig"
For installation, compiling and configuring please see manual for NavIt on Linux.
Then autogen.sh and configure navit. Example configure for wince:
./configure \ RANLIB=arm-cegcc-ranlib \ CXX=arm-cegcc-g++ \ CC=arm-cegcc-gcc \ --host=arm-pe-wince \ --disable-readline \ --disable-dynamic-extensions \ --disable-largefile \ --enable-tempstore \ CFLAGS="-I/opt/wince/include -mwin32 -DWIN32 -D_WIN32_WCE=0x0400 -D_WIN32_IE=0x0400 -Wl,--enable-auto-import" \ LDFLAGS="-L/opt/wince/lib" \ --prefix=/opt/wince/ \ WINDRES=arm-cegcc-windres \ --disable-vehicle-demo \ --disable-vehicle-file \ --disable-speech-cmdline \ --disable-speech-speech-dispatcher \ --disable-postgresql \ --disable-plugins \ --prefix=/opt/wince \ --disable-graphics-qt-qpainter \ --disable-gui-sdl \ --disable-samplemap \ --disable-gui-gtk \ --disable-gui-internal \ --disable-vehicle-gypsy \ --disable-vehicle-file \ --disable-vehicle-demo \ --disable-binding-dbus \ --enable-avoid-unaligned \ --enable-avoid-float
If example did not run, do this:
./configure \ RANLIB=arm-mingw32ce-ranlib \ CXX=arm-mingw32ce-g++ \ CC=arm-mingw32ce-gcc \ --host=arm-pe-wince \ --disable-readline \ --disable-dynamic-extensions \ --disable-largefile \ --enable-tempstore ¸\ CFLAGS="-mwin32 -DWIN32 -D_WIN32_WCE=0x0400 -D_WIN32_IE=0x0400 -Wl,\ --enable-auto-import" WINDRES=arm-mingw32ce-windres \ --disable-vehicle-demo \ --disable-vehicle-file \ --disable-speech-cmdline \ --disable-speech-speech-dispatcher \ --disable-postgresql \ --disable-plugins \ --prefix=/opt/wince \ --disable-graphics-qt-qpainter \ --disable-gui-sdl \ --disable-samplemap \ --disable-gui-gtk \ --disable-gui-internal \ --disable-vehicle-gypsy \ --disable-vehicle-file \ --disable-vehicle-demo \ --disable-binding-dbus \ --enable-avoid-unaligned \ --enable-avoid-float \ --enable-support-libc \ PKG_CONFIG=arm-mingw32ce-pkgconfig
This is basic just to view the maps. Then:
As usual, osm2navit.exe will fail to compile.
cd navit && make navit.exe
You find navit.exe under (your directory)/navit/navit/navit.exe
Install sync on your system.
For installation you need packages librapi, liprapi2, pyrapi2, libsync. Package synce-0.9.0-1 contains librapi and libsync. You do not need to install it again!
Once you have navit.exe ready, copy /opt/cegcc/arm-cegcc/lib/device/*.dll on your device.
For Debian use:
synce-pcp /opt/cegcc/arm-cegcc/lib/device/cegcc.dll ":/windows/cegcc.dll" synce-pcp /opt/cegcc/arm-cegcc/lib/device/cegccthrd.dll ":/windows/cegccthrd.dll"
All other Linux/Unix systems use:
pcp /opt/cegcc/arm-cegcc/lib/device/cegcc.dll ":/windows/cegcc.dll" pcp /opt/cegcc/arm-cegcc/lib/device/cegccthrd.dll ":/windows/cegccthrd.dll"
Synchronisation with a grahic surface, if connection to device failed:
Packages RAKI and RAPIP you can use.
RAKI you have in packages synce-kde (see Synce).
RAKI is like Active Sync, RAPIP is a little bit like fish:// under Konquerror.
Under SuSE Linux you can run kitchensync (not for all PDA).
For synchronisation you can also use kpilot under Suse Linux (runs not with all PDA) or Microsoft Active Sync under Windows (free download at Microsoft homepage).
You can put your memory card in card reader and copy data. Over console you must type in
before you remove memory card.
synce-pcp navit.exe ":/Storage Card/navit.exe"
pcp navit.exe ":/Storage Card/navit.exe"
Prepare a navit.xml.wince
Change gui to win32 and graphics to win32.
Fix the paths to your maps "/Storage Card/binfilemap.bin"
synce-pcp binfilemap.bin ":/Storage Card/binfilemap.bin" synce-pcp navit.xml.wince ":/Storage Card/navit.xml"
pcp binfilemap.bin ":/Storage Card/binfilemap.bin" pcp navit.xml.wince ":/Storage Card/navit.xml"
For a start best use the samplemap. Now you can launch navit.exe on the device.